Performance Features: This machine was designed as reinforced gantry structure with the advantage of high rigidity and stable running.
The welding power is used with DC frequency inverter power supply system with the features of electricity and energy saving.
The machine is equipped 12pcs of welding cylinder and 6 pcs or 4 Ppcs sets transformer prower. welding current of each single point could be adjusted independently in order to ensure the reliability of welding spot needs current. For the increasing the output efficiency, it is designed as double-layer feeder for cycle running. When one feeder is under welding ,about other fixture is manual loading the tube process. Automatic mesh welding. used servo motor will drive to fixtures of both side belt go to needs correct welding position andensure the mesh dimensions Automatic stacking device: after welding the mesh, the top cylinder will take off the mesh and automatically grab it will movedown to stacking. The setting position by servo motor. It helpful to reduce labor force and lower labor intensity. feeder for the convenience oftransportation ,automatic stepping welding. Servo motor will drive the stepping belt to ensure the accuracy of stepping position.
Professional customized non-standard automated welding machines, welcome to inquire accordingly. Heat exchanger welding machine Maunl put the parts ,with double side cylamping the round sheet for gap keep currect position ,then push the starts bottom for the upper welding gun begging weling. ,used Siemens Servo motor ,PLC ,HIM for system to be control while operation ,the good accessores can be weld got good processing . For welding speed can be maunal setting ,Start points ,End points .when finish the welding for all function will back orging ,manual take off the parts .
it used the TIG wire welding processing,let the welding gap got the weld deeper better.
English
简体中文
